Crypto Tsunami 8,9,10 GPU case. Here is the deal: we took our popular Crypto Monster 6 GPU case and gave it an ungodly dose of (virtual) steroids! The result is an impressive 8,9 or even 10 GPU mining case which incorporates improvements based on the feedback of our users.You asked for it, we did it! The Crypto Tsunami case is beefier and is fully stackable in such a way that units can be easily bolted together using our stacking kit (super easy). The unit is designed to allow the use of massive CPU coolers when necessary. It boasts an impressive seven 140 mm fans but you can also use cheaper 120 mm fans without any modifications (or a combination of both). Up to 10 graphic cards! The Crypto Tsunami is our most versatile case to date and thanks to major advances in mining technology it is now easier than ever to setup 8, 9 or even 10 cards.
Setting up 8 cards is really straightforward, here is what we are using: ASUS Prime Z-270 A (7 PCI slots) or ASUS Prime Z-270 P (6 PCI slots) and for the 8. Card we use a cheap M2 to PCIe adapter. If you use the cheaper Prime P you will need 2 of the M2 to PCIe adapters. A few changes in the BIOS settings and it works like a dream when using ethos or Linux. It works also with Windows 10 Pro but it is a little bit more tricky to setup.If you want to use 9 or 10 cards, here is how it works: add your 9. Card directly on the motherboard and secure them using the lower GPU bar. You will need to use 2x M2 to PCIe adapters and 1x PCI splitters with 3 PCI slots. Here are the key features: - ATX or Micro ATX motherboard mounts (brass posts and screws included). Extended ATX motherboards will also fit. You can install 1 or 2 power supplies of any length. The power supplies can be rotated 180 degrees thanks to our mirrored screw pattern (this way the PSU intake fan can be facing outwards for cooler air). This case is designed to accommodate graphic cards of any length. If you are using cards shorter than 24 cm simply request our shorter card kit and we will include it free of charge! - The case has ample room to allow for easy access and natural airflow but if necessary you can install up to 7 case fans, 140 mm or 120 mm. On the lower level 3 fans can be installed to cool the motherboard, CPU, hard disk or your 9. Graphic cards works very well! On the upper level you can mount up to 4 fans to cool the graphic cards.
Our tests have shown a substantial drop in GPU temperature with the fans installed but keep in mind that the amount of cooling is entirely dependent on your own local conditions, the type of fans and the graphic cards used. Included rubber grommets for clean routing of GPU and fan cables. Very helpful to reduce cable clutter that can impair airflow. There are 3 spots pre-drilled for standard 2,5 hard disks or SSD drives.This allows you to mount your drive in the best possible position according to your motherboard layout and accessories used but you can also use 2x SSD drives: one for Linux and one for Windows - All screws and special hardware necessary are included. It is a win-win situation and rest assured that our detailed instructions will make assembly of this unit a breeze! - Another advantage is that the Crypto Tsunami allows you to upgrade at any time. The case fans are not an absolute necessity and as can be seen on the pictures the mounting pattern of the fans is designed to let air flow naturally when no fans are installed.
Other information: - We recommend the use of high quality PCI risers, try to avoid the ones that have a Sata to molex power cable because the yellow wire overheats and shorts out internally leading to card failure! Make sure the USB cables that come with the PCI risers are 50 to 60 cm long (19.7 to 23.6 inches) The Crypto Tsunami case takes a lot of headaches away from the mining experience because everything fits like it should so you don't have to spend time drilling and cutting. We went thru all the major headaches of trying to figure out what works and what doesn't so if you really think about it, the Crypto Tsunami is very reasonably priced and represents less than 10 % of the overall cost of a rig..
On/Off/Reset switch: very convenient to start or reboot the machine, much better than using a paper clip! Extremely useful, inexpensive and easy to install. There are essentially 2 units available: a transistor and a relay version, both work fine, it is only a matter of personal preference.
All Crypto Tsunami cases have the holes pre-drilled in 2 different spots to accommodate both versions of the second PSU switch. 3 M2 to PCIe adapter. Very cheap and very reliable!
It is a simple adapter without any electronic components so no driver is necessary and thats because the M2 protocol is PCIe native! A PCI splitter: a must if you intend to use 10 graphic cards. It plugs via a USB cable into one of your motherboards PCI slots and turns it into 3 extra slots.
All Crypto Tsunami cases have the holes pre-drilled in 2 spots for the PCI splitter. 5 A fan board: allows you to connect up to 8 fans via a Sata power cable. The underside of the board has a piece of tape so you can install the board underneath the GPU tray and connect your fans.If you use really powerful fans then use 2 boards so you dont overload the Sata cable. Width: 68,0 cm (26.7 inches) - Depth: 36,0 cm (14 inches) - Height: 40,0 cm (15.7 inches). It takes around 15 minutes and all you need is a couple of Philips screwdrivers. You get all necessary hardware to assemble the case, motherboard and hard disk/SSD. The item "8, 9,10 GPU, crypto mining rig frame, aluminum case, Crypto Tsunami" is in sale since Friday, March 3, 2017. This item is in the category "Computers/Tablets & Networking\Computer Components & Parts\Computer Cases & Accessories\Computer Cases".
The seller is "werewolfpat" and is located in Prague. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.