The spacing between each GPU slot is 65mm (about 2.56in), gives the GPU enough space for air circulation and prevents the GPU from overheating. The size of case fits most video cards. (Except 3060, because 3060 GPU need dedicated motherboard). Our mining GPU frame case is made of high-quality steel, the surface is flat and smooth, and the internal space is large.The internal motherboard design is great, the overall size of the chassis is 27.55in15.75in6.69in. ETH Mining rig case Including?
Motherboard, Intel CPU (with CPU cooling plate1), power cord, 128GB mSATA SSD, 4G DDR 3, 5200 rpm cooling fan 4, 8(6+2)Pin graphics power cable (motherboard and fan power, all cables are 12V), screws12, power switch cord1. Compatible with Linux/windows/OS system (You need to install the system yourself), Without GPU and PSU. Our mining rig case does not have GPU installed and requires you to install your GPUS.
It fits most GPUs (except 3060), and the length of the GPU cannot exceed 34cm. You need to reinstall the system. The mining machine system does not come with instructions. Specifically designed for cryptocurrency mining.
ALIXUEQIN 8 GPU Mining Rig Case for BTC/ETH/ZEC. Our mining GPU frame case is made of high-quality steel, with a flat and smooth surface and a large internal space.
The internal motherboard design is great, and the overall size of the chassis is 27.55in15.75in6.69in. The design of the mining machine chassis is very good, the space is large, and the combination of fans and cooling holes makes the heat dissipation effect very good, thereby improving the working efficiency of the mining machine chassis. A 4U mute power supply can be placed in the power supply position, so that the chassis can reduce noise during use.
There are external power sockets, you can use the external power socket when your power supply size is not suitable. Mining Rig Frame does not include GPU/PSU/OS. B85 motherboard is more compatible than other motherboards, suitable for most GPUs (except 3060). There may be noise when the machine is working, the noise is mainly from the cooling fan, if you mind, please consider it. Please ensure that your power supply must be a single-channel power supply when using it, otherwise it may damage your motherboard and GPU.
B85-8 cards in-line PCI-E 16X spacing 65MM. 4 fans (3000 5200)RPM.
Realiek 8111H Gigabit LAN Ethernet (support network boot or PXE boot). 1866/1066 /1333/ 1600MHz The peak memory can reach 8G.27.55" long x 15.75" wide x 6.69 high. The crypto mining rig comes with 8 GPU -16X Slots, and the GPU slot spacing is 65MM. The case does not come with a GPU and requires you to install your own GPUS, except for the 3060. The CPU heat sink efficiently releases the heat generated during the working process of the miner. Improve the efficiency of your miner.
Reduce damage to miners caused by overheating. Four 5200 rpm cooling fans.
Four 5200 rpm cooling fans enhance the heat dissipation of the miner chassis, and interact with the cooling holes on the other side to keep the miner at a suitable working temperature during work. Reduce overheating damage and improve work efficiency. If the noise is too loud, you need to check for loose screws.
8GPU cryptocurrency mining machine chassis other functions introduction and precautions. The space size of the power location of our miner frame is: 240mm (9.4 inches) 160 mm (6.3 inches) 90 mm (3.5 inches), it is the best choice for 4U silent power supply. Important: You must use a single-channel power supply, otherwise the entire mining system may be damaged. If you choose a different size power supply, you may have to figure it out yourself.If your power supply size does not fit, we also have an external power supply interface. Our miner case does not contain GPU, you need to use your own GPUS. Fits most GPUs, except 3060. 8 GPUS can be inserted. The length of the GPU cannot exceed 340MM. Our case does not have an operating system, you need to install the operating system yourself. If the chassis you received has a Chinese system (which needs to be installed for factory testing), you need to reinstall the English system. Our miner chassis is suitable for operating system: Linux/windows/os. You need to prepare a 4u single-channel power supply and 8 GPUs before installation.
We provide 8(6+2)pin adapter cable. You need to connect the two power cables to the motherboard and the remaining 8 power cables to the GPUs. If your power supply size is not suitable, you can try an external power jack. Mining machine chassis with motherboard1pcs. The RAM/CPU/fan has been installed in the correct position inside the case.
27.55 x 15.75 x 6.69 inches. Thank you for shopping at our store. This item is in the category "Coins & Paper Money\Virtual Currency\Miners". The seller is "chhaiba-accessories" and is located in this country: US.
This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, South Korea, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Republic of Croatia, Malaysia, Brazil, Chile, Colombia, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Iceland, Jersey, Jordan, Cambodia, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Maldives, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam.